wood shredder

Wood Shreedder - Shredder INDUSTRY 400

28 800 € excl. VAT

INDUSTRY 400 CRUSHER CRUSHER (coarse and fine crushing) 12 kW

The middle line of crushing technology is the INDUSTRY 400 twin-rotor CRUSHER (hereinafter referred to as DI400) and his purpose is to ensure the smooth disintegration of easily crushable objects. The advantages of this type of crushing technology lie in a wide range of applications, despite the smaller dimensions of the crushing chamber and low electrical input (upper crushing part 4.4 kW, lower part 7.5 kW). DI400 can handle wooden boxes, pallets, wooden boards, branches, it can process waste from production (cuttings), but also plywood, chipboard.

It is an ideal helper for larger carpentry centers. In addition to wood waste in production, it will crush a harder material (oak, beech, spruce) in adequate quantities. The output fraction in the size of 2 x 2 mm - 20 x 20 mm is suitable for pellets / briquettes. The working power of the crusher is 250 to 350 kg / hour. With its dimensions of 0.7 m x 0.7 m x 1.7 m (L x W x H), it is suitable for any operation.

The material is crushed in two stages. First, the material is processed coarsely, followed by fine crushing by means of an additional shaft with a hammer crushing method. This ensures finer crushing and the output fraction can be regulated by an additional sieve.

Another advantage of the DI400 is its robust construction. During its production, no materials are saved and no materials are thinned to the stop. Robust processing eliminates the possibility of resonance and associated noise

The basis of high-quality crushing technology is, among other things, crushing gearing. Ours changed during testing and development, until all previous practical engineering experience and especially dexterity was reflected in the new crushing technology. Our crushing gears are really quiet and very efficient. In case of damage to the crushing teeth, it is also possible to change the individual teeth. The construction of the crusher is designed so that it is possible to change the crushing teeth without the use of special tools. They are easily accessible and can be replaced by any maintenance worker or technician. And with common tools!

The DI400 is equipped with electric gearboxes of the German brand. The ground gearing of these gearboxes contributes to their high efficiency. This leads to maximizing the output power of the shredder and minimal energy losses. A high-quality shredder drive saves energy and thus your finances, at the same time the entire shredder drive is very quiet.

SMART crushing technology has been implemented in the process of manufacturing crushing technology, which reflects many years of experience and observations from practice. Intelligent control is noticeably reflected in the crushing performance, which ensures a larger amount of crushed material compared to crushed material with conventional crushers. Intelligent crushing also eliminates electrical and mechanical shocks, extending the life of the entire device and the stability of the electrical network.

The DI400 includes an electric gearbox with a high operating factor (high overload capacity), which is very important especially in the event of a sharp jamming of the crusher gears. Such a sharp jam causes a great impact force and overload. Thanks to the high overload capacity, the drive is stable and durable even in the event of a severe jammer jam.

DI400 are equipped with bearings with a hardened surface and a low coefficient of friction. The hardened surface of the bearing is a guarantee of long operation without damage. This eliminates equipment failure, downtime and service. Due to the low coefficient of friction, the bearing is very quiet and has a very high efficiency. High efficiency maximizes output power. The shredder thus saves energy and therefore also operating costs.

If the technical parameters of the DI400 are not sufficient, Shredder Technology offers a more powerful twin-rotor INDUSTRY 500 CRUSHER from the mid-range of crushing technology.

Choosing the right model of crushing technology largely depends on the properties of the material being processed. Therefore, we recommend working closely with qualified Shredder Technology employees, whose expertise will provide you and your company with the most optimal solution. Own production also brings a high degree of flexibility. Crushing technology is designed so that it can be easily incorporated into most plants and technologies.

I am interested